1. Product electrical parameters:
(1) Input voltage: 100-240VAC (50Hz);
(2) Input current: 1.75A(@100VAC), 0.88A (@240VAC);
(3) Output suspended voltage: DC29.8V±0.5V;
(4) Charging voltage: DC-13.8V/27.6v;
(5) Output current Imax: 12V / 8A; 24V / 4A;
(6) Suitable battery capacity range of the charger: 2 AH-150 AH;
(7) Product charging efficiency β:
l A: 76.0% (@ input voltage: 100VAC, output voltage: 13.8V, output current: 7.3A);
l B: 83% (@ input voltage: 240VAC, output voltage: 13.8V, output current: 7.5A).
2. Product function mode selection:
(1) Car battery charging mode
A: Charging current: Imax:8.2A@DC13.5V;
B: Charging voltage: 13.5V-Intelligent control voltage (winter mode: 15.5V, summer mode: 14.6V, spring and autumn mode: 14.9V);
C: Battery type: lead-acid battery;
D: Charging maximum current Imax:8.2A@DC13.5V battery mode;
E: the maximum single charging time tmax: 20H (the maximum capacity of a single charge is 85-95 AH);
(2) AGM battery charging mode
A: Charging current: Imax:8.2A@DC13.5V;
B: Charging voltage: 13.5V;
C.: Battery type: AGM battery;
D: Charging maximum current Imax:8.2A@DC13.5V battery mode;
l E: The maximum single charge time tmax: 20H (the maximum capacity of a single charge is 10-150 AH);
(3) Motorcycle charging mode
A: Charging current: Imax:1.45A@DC13.5V;
B: Charging voltage: 13.5V;
C: Battery type: conventional DC12V lead-acid battery;
D: Charging maximum current Imax:1.45A@DC13.5V battery mode;
E: maximum single charging time tmax: 20H (maximum single charging capacity of 2-15 AH);
(4) Lead-acid battery repair mode
A: repair principle: positive pulse voltage repair mode;
And b: Repair voltage: 14.9V;
C: Battery type: limited to lead-acid type battery;
And d: repair max tmax: 20H.
3. Product function brief introduction:
(1) Output short circuit, anti-reverse connection: the product has the output short circuit, reverse connection battery prompt (spark, LCD display "ERO", the detection process will not be damaged due to reverse connection or short circuit);
(2) Battery power detection: do not access the AC input voltage, the battery is sandwiched at both ends of the positive and negative electrode of the battery (red, positive and black negative), can display the current of the battery timely voltage parameters (digital tube display data: voltage and ambient temperature cycle display, power grid is displayed in the form of percentage according to the detection data);
(3) Winter and summer mode: during the charging process, detect the ambient temperature, timely adjust the charging state of the product, to ensure the battery life and charging safety. Winter mode: LCD displays snow, summer mode: LCD displays the sun;
(4) Over temperature protection: the product has the function of over temperature protection. If the product detects that the temperature is too high, the over temperature protection program will be started. When the temperature returns to the normal value, the initial charging state will be restored;
(5) Overcharge protection: the product has the function of overcharge protection to avoid the decline of battery life caused by overcharge, and enhance the reliability of charging safety (the maximum charging time is 20H);
(6) Charging voltage self-test: after the battery is charged, automatic self-inspection, no artificial switch. After the self-check, the floating charging will enter, if the compensation charging enters, and the floating charging will enter;
(7) The LCD display status:
A: Full charge state: LCD displays "OFF", power grid "100%";
B: Clip disconnection mode: LCD display "OFF", power grid "100%";
C: Fault mode: LCD display "ERO", "Flt" icon, buzzer long ring;
D: Charging status: LCD cycle display voltage, current, temperature, and "charging effect display";
E: Repair mode: LCD display "Rep", power grid "100%";
F: No-load detection battery: the LCD cycle shows the voltage and temperature, and the power grid is displayed in the percentage form according to the battery power.
